v6,3.4 ltr.
start with a cold engine.remove air tube between air box and throttle body.unplug and unbolt the coil packs.pull them directly up.a little twist back and forth may be needed.do not twist to hard.an extention 6-11'' will be needed.remove plugs.
on driver side,remove the wires,a twist may be neccasary.using an exteniton remove plugs.5/8 sparkplug socket needed.they or at least one ,back,is harder to get to but possible.dont pull on the wire itself.use some anti-sieze on the threads going back together.two different metals causes electrolosis.or simply it will sieze the plug in place.do not over tighten the plugs.
4 cyl.2.4/2.7
remove wires.you will have to finagle the wires around but you do not have to remove breather hose.just be carefull do not pull on wires or you will be buying a new set.extention,socket,anti-sieze.needed.
timing is computer controlled,no since checking or trying to reset it.if there is a prob with timing it is in the chain or timing belt,v6.
No comments:
Post a Comment