How easy is it to change spark plugs on a 2004 frontier?

With the v6 3.3L -

The manifold is not removed, only the upper air inlet tube (plastic) to gain access to the left front 2 plugs. All the other plugs (3 right side and left rear) are straightforward.



It's not difficult to remove the inlet tube and the seal is reusable. If you're handy with basic tools you'll do fine.



They recommend a double platinum plug set to .043';



P.S. - The above posted link is for the following years 4.0L v6 with coil over ignition. Yours uses regular ignition wires and distributor cap.How easy is it to change spark plugs on a 2004 frontier?
as easy as most cars. Just change themHow easy is it to change spark plugs on a 2004 frontier?
It might be kind of tricky. I just googled spark plugs 2004 frontier and came up with this website:



http://www.clubfrontier.org/forums/f23/h



Looks like you might even have to remove the manifold to get at one of them.



The good old days of simple 15 minute jobs like changing spark plugs are sadly gone.
same as every car just get a mickymouse swivle and a couple extions and a 3/16th deep well socket and a 3/4 ratched and get to work it will take u 5 mins but u should change ur wires and distributor cap and rotor well ur at it cuz ur gonna have more problems if u dont