How to change spark plugs!!! Trouble shooting?

I was chaining the spark plugs on my grand prix and were the spark plug meet the wire there a metel tube around the wire well when i replaced the spark plug and pressed it down the metel tube seemed loose is that normal are do i need to do something to that!! And on the other spark plug i pulled it to hard and now the part that claps on to the spark plug is showing some and i cant get the plastic sleeve to cover it!!! is that a problem and if so what can happen!! Thanks BrandonHow to change spark plugs!!! Trouble shooting?
Along with new wires you should get a distributor cap and rotor. About the wiggly cylinder I don't know what it could be but i dont think it will be a problem.How to change spark plugs!!! Trouble shooting?
You need to buy some new spark plug wires. You should get new wires every time you change the plugs.
use a pair of plyers to crimp that part tighter so it grabs the head of the plug good and tight,, be real careful not to put a hole in the rubber with the plyers, if your scared u will ruin the rubber use an old rag around the wire and grip it that way,, dont put to much force on it or u wont get the plug in it no more,, take a cpl times to get it right,,and when u replace the plugs its a good idea to use antiseize on the threads and conductive grease on the park plug boot to aid in the next removal,,Art
No thats not a problem . Your wires may be bad but even when there new they can be hard to get on. If you just push hard on the wires you will feel it click and it wont be loose at all.



If you can see the clamps in the wires sticking out it wont be a problem. If you damaged the wire to bad it will just not work and it wont fire off that plug but it will be fine. Wires will last a long time so it will probably be fine.

myspace layouts

msdn