Friday, November 19, 2010

How to change spark plugs on a HYUNDAI SANTA FE 2.7 V6?

WITH THE DEALERSHIP THEY CHARGE 100.00 FOR THE SPARK PLUGS (HOW THEY FIGURE THIS PRICE) THEN 350.00 PLUS TAX TO REPLACE THE 3 SPARK PLUGS IN THE BACK BECAUSE THE ONES IN THE FRONT YOU CAN GET TO THEM VERY EASY! IS THERE'S ANY OTHER OPTION, PLEASE I'M A SINGLE PARENT AND CAN DO THIS PRICE!!!How to change spark plugs on a HYUNDAI SANTA FE 2.7 V6?
get a cherry picker and pull the motor out then change the plugs and then put the motor back in Just joking LOL Don't know how to i'm a female to sorryHow to change spark plugs on a HYUNDAI SANTA FE 2.7 V6?
Although you can do it keeping the pipes on the throttle body on.Easy way i find is to undo the bolts in the center of the inlet and the 3 bolts at the back supporting the manifold and it should give you enough clearance to get to the plugs(careful not to damage the ht leads)
Do you need to change the spark plugs, because the engine is running rough, or the fuel economy or power has been poor?
i own a repair shop,and these aren't to bad to do you,ll need a good spark plug socket and ratchet to use on it ,and you,ll also need a swivel extension for it,be care full they break real easy going in ,and out ,but once you get them out ,be sure and re-gap the new plugs,and don't over tighten them when you install them,if you,ll take you time you can do a good job on it, the gap for the plugs is written on the tune-up sticker under neath of the hood ,and its also in the owners manual just don't get in a hurry ,because some of them are hard to get to,good luck i hope this help,s.

No comments:

Post a Comment