How to change spark plugs on 1990 ford tempo?

very simple, look at your engine, you should see these wide gauge cables running from the top of your engine to the sides, there should be 6 of them if you have a v6, 4 if not. They should be red or green, follow them down the side of the engine, and they should go into a hole on the side of the engine, pull those wires out of the hole, underneath are the spark plugs. Get a spark plug socket, and turn them to the left to pull them out, then put new ones in and put the wires back on, its that simple. OH AND DISCONNECT THE BATTERY FIRSTHow to change spark plugs on 1990 ford tempo?
rachet and a socketHow to change spark plugs on 1990 ford tempo?
first time around? one by one

pull the wire(grab it by the boot shape end)

use the right size socket and the ratchet.

at the intallation, put it with you hand,a few twist in the right thread and then the tool.
Remove them one at a time. Dont pull all the wires off and then try to find out which goes where. If you put the wires on wrong it will not start..First find out what the gap is for your vehicle. You will need a gap gauge for this..They are cheap. Check the gap on all the new ones. They say they have been properly gapped..That is not allways the case..Pull one wire off remove the plug with A deep socket...replace it with the new one and put the wire back on the plug..Repeat all the way down to the last one..

legitimate work at home job online

guys flirt with shy girls